Hygger Titanium Tube Heater, HG085

Why You’ll Love It

Made of TA2 aviation titanium alloy, the titanium tube heater is suitable for 10 to 80 gallons saltwater and freshwater fish tanks. It can not only conduct heat to the surroundings quickly and stably, but also be safer for your fish.

Key Features

Intelligent Temperature Control System

The hygger 085 titanium tube heater is made of TA2 aerospace titanium alloy, and the heater tube is covered with Teflon. It has a built-in intelligent IC chip, an accurate temperature control system, and a memory function. An external controller that can display water temperature and set the temperature.

Heating Memory Function

The temperature accuracy of the heater is 1°F/°C and the setting range is 68°F to 90°F (20°C-32°C). The titanium heater has a high IP68 waterproof rating and is also explosion-proof, corrosion-proof, and ozone-proof. In case of a power failure, the heater will heat up when power is restored according to the last setting.

Fast Heating, Safety, and Durability

The Aviation Titanium rod can fully convert electric energy into heat energy, save energy, and heat safely while heating quickly. The heating tube not only conducts heat to the surrounding environment quickly and stably, but also is safer for the creatures in the aquariums.

Temperature Calibration Function

When the internal temperature differs from the external temperature, the titanium heater can be calibrated by pressing the “+” and “-” keys for 5 seconds simultaneously. This calibration feature helps to set the temperature more accurately and makes the heater work better.

Overheating Protection

When the water temperature exceeds 95-97℉, the HG085 heater automatically stops heating, and the controller will flash the E2 fault code. It will start working automatically when the water temperature drops to 90℉.

Constant Temperature

When the water temperature is 1-2℉ lower than the set temperature, the red indicator will light up and start heating automatically. The hygger titanium heater will always maintain a comfortable temperature for your tank.

Usage Tips

Tips to use hygger titanium tube heater

1. Completely submerge the heater in water; do not bury it in sand or expose it to air.
2. The temperature sensor and heater must be completely immersed in water simultaneously to work together, and the distance between the two should not be too close.
3. Disconnect the power socket and wait 15 minutes before changing the water or removing the heater.

How to set the hygger 085 aquarium heater

1. Press the ‘Set’ button and then press the “+” or “-” button to the desired temperature, the temp + or – 1℃/℉ with each time press. Once the setting is done, the screen will display the current water temperature.
2. Press and hold the ‘Set’ button for 5 seconds to switch the temperature unit of ℉/℃ easily.
3. Press and hold “+” and “-” simultaneously for 5 seconds to perform temperature calibration. The temperature calibration range is 士5℉/℃.
4.The voltage is 110-120V, 60Hz, the power cord is 4.82+1.31 feet.

Suggestions

1. We recommend installing the heater vertically or horizontally underwater near the water intake. But vertical installation doesn’t take up much space.
2. Use a wave maker or circulating pump in the fish tank. Good water circulation helps to distribute the heat generated by the heater evenly.

Specification

Package:
1 x Heater with controller
3 x Suction cups
1 x User manual